Why Choose FU-618F Solid State 10KW FM Transmitter Package for FM Radio Station?

1. If you are a professional radio station operator, or you are ready to build a professional FM radio station, and you are looking for a reliable solid-state FM broadcast transmitter package for your radio station, then you may need this complete radio station package from Fmuser: FU618F 10KW Solid State FM Transmitter package.
2. This is definitely a solid-state FM transmitter package with amazing performance, which ​inherit the characters of both the budget price that FMUSER FM broadcast transmitter series have in almost ten consistent years, while also comes with the advantages of being high-quality, which can be compared to with the Rohde & Schwarz high power FM transmitters but with only half of or one-fifth (even less)  of the same cost as Rohde & Schwarz transmitters have. 
3. Whether in terms of broadcast performance or service life, we can assure you and your customers the best FM broadcast experience in addition to this, we will also provide online technical support to protect your FM radio station from head to toes, discover your station potential, and play the best ability of this solid state 10KW FM transmitter as well as the 8 bay FM antenna to the extreme. 
4. If you want to know more, we also offer a diverse radio station solution for your reference and make sure that every single manufacturing progress, re-processing progress, transportation progress is with quality assurance.

You can fully believe in the FU618F 5KW FM transmitter package, just like you believe in FMUSER.

Benefits You Can Not Resist

• Twelve Units 1KW hotplug RF power modules. Total output power is extremely stable thanks to AGC(Automatic Gain Control).
• Ten units 2.5KVA switched power supply modules working parallel.
• 12-way High-efficiency combiner with patent technology.
• Two All-digital 30W exciters with switcher used to drive each module directly(optional).
• Analog and digital(AES/EBU) audio signal input directly.
• 8-inch Color LCD with touch panel displays all the parameters in real-time.
• Five kinds of protection methods by MCU, like over Pf, over SWR, over Temp, Voltage, Current.
• Real hot-plug structure, the modules can be repairing in non-stop condition.
• RS232/RS485 Communication interface ready for the remote system.

Where You May Find FU-618F Solid State 10KW FM Transmitter Useful

• Professional FM radio stations at provincial, municipal, and township levels
• Medium and large FM radio stations with ultra-wide coverage
• Professional FM radio station with over millions of audience
• Radio operators who want to buy large professional FM radio transmitters at a low cost

• 1* FU618F 10KW Solid State FM Transmitter
  
• 8 bay FM-DV1 Dipole Antenna

What You Need to Know

• The shipping cost was roughly calculated, please consult us about the freight before placing an order. 

Electrical Index of FU-618F Solid State 10KW FM Transmitter Package

FU-618F Solid State 5KW FM Transmitter:

• Frequency Range: 87.0MHz~108 MHz
• Frequency Setting step: 10KHz
• Carrier Frequency precision: 200Hz
• Residual Wave Radiation: 75dBc
• Analog Audio Input Impedance: 600Ω, Balance
• AES/EBU digital audio input impedance: 110 Ohm, Balance
• Separation: 50dB,30Hz~15KHz
• Audio Input Level: -10dBm~+10dBm, step 0.01dB
• S/N: 75dB (1kHz, 100%modulation)
• Audio Harmonic Distortion: 0.1%
• Audio response: 0.1dB(10Hz~15KHz)
• Output Load Impedance: 50Ω
• Output Power: 0~10KW
• Pre-emphasis: 0μS, 50μS, 75μS
• Deviation: ±: 75kHz
• Pilot Frequency: 19 kHz; 1Hz
• RF Output Interface: 3+1/8′
• Antenna Gain: 10.5dB 
• Size: Width(144mm),Height(1950mm),Depth(900mm)
• Weight: 550KG

FM-DV1 8 Bay FM Dipole Antenna:

Electrical Index:

• Product Type: FM-DV1
• Characteristic Impedance: 50Ω
• Frequency range: 87 ~ 108 MHz
• Antenna Gain: 9.3dB
• Polarization: Vertical Polarization
• VSWR: <1.10 (specify frequency), “1.30 (full bandwidth)
• Rated power: 1KW / 3KW/5KW/10KW
• Group matrix combination of the antenna array unit is particularly suitable for the formation of a variety of radiation patterns
• Input Interface: L29K

Mechanical Index:

• To withstand wind load: 32kg
• Maximum speed: 160km / h
• Antenna Weight: 11kg
• Mast diameter: φ50-100mm
• Dimensions: 1360x1060x60mm
• Radiator: 304
• Inner conductor: silver plated copper
• Insulation support: PTFE
• Clamp: hot-dip galvanized steel